Eye Bolt LES
Production standard:
DIN 580 resp. DIN 582.
Performance:
Forged with peg, (LES) or inside hole, (LEN).
Safety factor:
4:1.
Finish:
Galvanized
Max. load stated in table below is only due if below directions are followed:
Note: The lifting eyes shall be tightly screwed against the surface. When two lifting eyes are used their mutual position shall result in the two eye in the same surface. Larger angle between the slings than 90° is not tolerated. Lifting eyes can not be assembled against a surface that differ essentialy from a surface perpendicular to the direction of the lift.
